Multi-function Stalks

The device is 100% satisfied with the device. The atmosphere of the games is changing dramatically. Delight and satisfaction.

But (Moza R5), there were minor problems when installing on the bracket included in the kit (mounted on 2 small screws on top of the Moza R5 housing).
1. After installation, the device turned out to be lower than required, and the protrusion plate for returning the turn signal lever on the MOZA Quick Release Adapter included in the kit strongly touched the Multi-function Stalks housing at the top of the hole. The steering wheel axis turned out to be 2-3 mm higher than the axis of the central hole in the Multi-function Stalks. It was noticeable even visually.
SOLUTION: I placed a 2.0 mm thick plate under the bracket (2.5-3 mm is needed to ensure that the steering wheel axis is centered. When I find it, I'll install it).
2. Perhaps due to this displacement of the steering wheel axis inside the hole of the installed Multi-function Stalks, a small part designed to interact with the protrusion plate on the MOZA Quick Release Adapter included in the kit and return the turn indicator lever to the non-vertical position in the "right turn is indicated" position touched the MOZA Quick Release Adapter, and when the "left turn is indicated" position, it did not work due to poor mechanical contact with the protrusion plate on the MOZA Quick Release Adapter.
SOLUTION: It took a long and painstaking adjustment of the Multi-function Stalks position relative to the steering column axis and mounting depth.
Perhaps these difficulties are related to the mounting on the bracket. And with the front mount (R9, R12, R16, R21), there are no problems with centering.
I believe that this very minor problem of a wonderful device can be solved by paying more attention to the precision of the bracket manufacturing or by adding adjustment plates to the kit.

It's amazing but... It's fitting it to a Fanatec wheel base has been difficult. I did get it to work but I had to use fanatec's shaft extension and it severely limits the adjustment I can make in my rig, but other than that it is amazing the feel is legit it's functionality is flawless I just wish it had "ignition switch" options like most cars

If your into your truck sims then this is really a must gave piece of kit. It brings a whole new immersion level to a driving sim. It's not just for truck sims this would add a great amount of playability to any driving game. It's relatively easy to fit to a Moza base, it's made from parts of a real vehicle and just like the rest of Moza products, bases the TSW and the rest It's really good quality. This is what has been missing, thanks Moza. I purchased this myself (i didnt receive a review copy) before Christmas and it arrived before my Christmas holidays so I've got a lot of use out of it. The auto cancel function works perfectly, you can also have a short indicator burst by pushing the stalk lightly or hold for a longer time for a longer burst without pushing it fully into place, just like a real car. Also the wiper and cruise control stalk works as expected if configured correctly in the game. Love it! Recommended? Certainly!

super

Excellent build quality and they work great.

Was a shame to see the pass through link to the wheel base wasn't an option, as it means "another USB" , a small complaint.

Luckily I had designed a custom shroud for mine before it even arrived, as I use the extended steering shaft, without the centre shroud I had made this would have been impossible to mount properly.

I hope in time more is done with the software support to change how some of the inputs are read by games etc, latched, momentary, pulse etc

Fantastic, much better than I expected. Especially thanks for the software interface for ETS2 and ATS and the straightforward configuration guides.

If you are into sim racing or any vehicle sim for that matter MOZA multi function stalks are a must have you want regret it.

I would like that it also has a retarder brake for the trucks that you can slide down to use. :)